SSD

  • THNSNC064GBSJ
    • S.M.A.R.T
    • <code>root@yuyuko:~# ./hdd_temp.sh smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.11] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

START OF INFORMATION SECTION

Device Model: TOSHIBA THNSNC064GBSJ Serial Number: X05S108DTCJZ Firmware Version: CJTA0202 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Dec 20 23:15:43 2011 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x00) Offline data collection activity

                                      was never started.
                                      Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

                                      without error or no self-test has ever
                                      been run.

Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate.

                                      Auto Offline data collection on/off support.
                                      Suspend Offline collection upon new
                                      command.
                                      Offline surface scan supported.
                                      Self-test supported.
                                      No Conveyance Self-test supported.
                                      Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

                                      power-saving mode.
                                      Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

                                      General Purpose Logging supported.

Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 7) minutes. SCT capabilities: (0x0039) SCT Status supported.

                                      SCT Error Recovery Control supported.
                                      SCT Feature Control supported.
                                      SCT Data Table supported.

SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTENAME FLAG VALUE WORST THRESH TYPE UPDATED WHENFAILED RAWVALUE 1 RawReadErrorRate 0x000a 100 100 000 Oldage Always - 0 2 ThroughputPerformance 0x0005 100 100 050 Pre-fail Offline - 0

3 Spin_Up_Time            0x0007   100   100   050    Pre-fail  Always       -       0
5 Reallocated_Sector_Ct   0x0013   100   100   050    Pre-fail  Always       -       0
7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       72

10 SpinRetryCount 0x0013 100 100 050 Pre-fail Always - 0 12 PowerCycleCount 0x0012 100 100 000 Oldage Always - 2 167 UnknownAttribute 0x0022 100 100 000 Oldage Always - 0 168 UnknownAttribute 0x0012 100 100 000 Oldage Always - 0 169 UnknownAttribute 0x0013 100 100 010 Pre-fail Always - 481070416328 170 UnknownAttribute 0x0013 100 100 010 Pre-fail Always - 231944749138 173 UnknownAttribute 0x0013 200 200 100 Pre-fail Always - 0 175 ProgramFailCountChip 0x0013 100 100 010 Pre-fail Always - 0 192 Power-OffRetractCount 0x0012 100 100 000 Oldage Always - 0 194 TemperatureCelsius 0x0023 076 073 030 Pre-fail Always - 24 (Min/Max 20/27) 197 CurrentPendingSector 0x0012 100 100 000 Oldage Always - 0 240 HeadFlyingHours 0x0013 100 100 050 Pre-fail Always - 0

SMART Error Log Version: 1 No Errors Logged

SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1 SPAN MINLBA MAXLBA CURRENTTESTSTATUS

  1        0        0  Not_testing
  2        0        0  Not_testing
  3        0        0  Not_testing
  4        0        0  Not_testing
  5        0        0  Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.</code>

device/ssd/start.txt · 最終更新: 2011/12/20 23:18 by yuki
CC Attribution-Noncommercial-Share Alike 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0