差分
この文書の現在のバージョンと選択したバージョンの差分を表示します。
次のリビジョン | 前のリビジョン | ||
device:ssd:start [2011/12/20 23:18] yuki 作成 |
— (現在) | ||
---|---|---|---|
ライン 1: | ライン 1: | ||
- | ====== SSD ====== | ||
- | |||
- | * THNSNC064GBSJ | ||
- | * S.M.A.R.T | ||
- | * <code>root@yuyuko:~# ./hdd_temp.sh | ||
- | smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.11] (local build) | ||
- | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | ||
- | |||
- | === START OF INFORMATION SECTION === | ||
- | Device Model: TOSHIBA THNSNC064GBSJ | ||
- | Serial Number: X05S108DTCJZ | ||
- | Firmware Version: CJTA0202 | ||
- | User Capacity: 64,023,257,088 bytes [64.0 GB] | ||
- | Sector Size: 512 bytes logical/physical | ||
- | Device is: Not in smartctl database [for details use: -P showall] | ||
- | ATA Version is: 8 | ||
- | ATA Standard is: Exact ATA specification draft version not indicated | ||
- | Local Time is: Tue Dec 20 23:15:43 2011 JST | ||
- | SMART support is: Available - device has SMART capability. | ||
- | SMART support is: Enabled | ||
- | |||
- | === START OF READ SMART DATA SECTION === | ||
- | SMART overall-health self-assessment test result: PASSED | ||
- | |||
- | General SMART Values: | ||
- | Offline data collection status: (0x00) Offline data collection activity | ||
- | was never started. | ||
- | Auto Offline Data Collection: Disabled. | ||
- | Self-test execution status: ( 0) The previous self-test routine completed | ||
- | without error or no self-test has ever | ||
- | been run. | ||
- | Total time to complete Offline | ||
- | data collection: ( 120) seconds. | ||
- | Offline data collection | ||
- | capabilities: (0x5b) SMART execute Offline immediate. | ||
- | Auto Offline data collection on/off support. | ||
- | Suspend Offline collection upon new | ||
- | command. | ||
- | Offline surface scan supported. | ||
- | Self-test supported. | ||
- | No Conveyance Self-test supported. | ||
- | Selective Self-test supported. | ||
- | SMART capabilities: (0x0003) Saves SMART data before entering | ||
- | power-saving mode. | ||
- | Supports SMART auto save timer. | ||
- | Error logging capability: (0x01) Error logging supported. | ||
- | General Purpose Logging supported. | ||
- | Short self-test routine | ||
- | recommended polling time: ( 2) minutes. | ||
- | Extended self-test routine | ||
- | recommended polling time: ( 7) minutes. | ||
- | SCT capabilities: (0x0039) SCT Status supported. | ||
- | SCT Error Recovery Control supported. | ||
- | SCT Feature Control supported. | ||
- | SCT Data Table supported. | ||
- | |||
- | SMART Attributes Data Structure revision number: 16 | ||
- | Vendor Specific SMART Attributes with Thresholds: | ||
- | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | ||
- | 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 | ||
- | 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | ||
- | 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0 | ||
- | 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 | ||
- | 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | ||
- | 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | ||
- | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 72 | ||
- | 10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0 | ||
- | 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 2 | ||
- | 167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 | ||
- | 168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 | ||
- | 169 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 481070416328 | ||
- | 170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 231944749138 | ||
- | 173 Unknown_Attribute 0x0013 200 200 100 Pre-fail Always - 0 | ||
- | 175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0 | ||
- | 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 0 | ||
- | 194 Temperature_Celsius 0x0023 076 073 030 Pre-fail Always - 24 (Min/Max 20/27) | ||
- | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | ||
- | 240 Head_Flying_Hours 0x0013 100 100 050 Pre-fail Always - 0 | ||
- | |||
- | SMART Error Log Version: 1 | ||
- | No Errors Logged | ||
- | |||
- | SMART Self-test log structure revision number 1 | ||
- | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
- | |||
- | |||
- | SMART Selective self-test log data structure revision number 1 | ||
- | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
- | 1 0 0 Not_testing | ||
- | 2 0 0 Not_testing | ||
- | 3 0 0 Not_testing | ||
- | 4 0 0 Not_testing | ||
- | 5 0 0 Not_testing | ||
- | Selective self-test flags (0x0): | ||
- | After scanning selected spans, do NOT read-scan remainder of disk. | ||
- | If Selective self-test is pending on power-up, resume after 0 minute delay.</code> | ||