差分
この文書の現在のバージョンと選択したバージョンの差分を表示します。
| 両方とも前のリビジョン 前のリビジョン | |||
|
os:oi:smartctl:start [2021/05/22 23:20] yuki 削除 |
— (現在) | ||
|---|---|---|---|
| ライン 1: | ライン 1: | ||
| - | ======= smartctl ====== | ||
| - | |||
| - | * 前提 | ||
| - | * Solaris系のS.M.A.R.TはATAコマンド叩けない。 | ||
| - | * AHCIならできる。IDE互換だと無理。諦めましょう。 | ||
| - | |||
| - | * smartctlのコンパイル | ||
| - | * <code># pkg install gcc-dev | ||
| - | # wget http://sourceforge.net/projects/smartmontools/files/smartmontools/5.40/smartmontools-5.40.tar.gz/download | ||
| - | # tar zxvf smartmontools-5.40.tar.gz | ||
| - | # cd smartmontools-5.40 | ||
| - | # ./configure && make | ||
| - | # make install</code> | ||
| - | |||
| - | * 検索したら引っかかった人。 | ||
| - | * http://cafenate.wordpress.com/2009/02/22/setting-up-smartmontools-on-opensolaris/ | ||
| - | |||
| - | |||
| - | * SASカードであるところの[[:device:sata:br10i:|BR10i]]にぶら下がっているHDDに向けて使ってみる。 | ||
| - | * -T permissive つけた方が表示速度的に良いかも。 | ||
| - | * <code># ./smartctl -T permissive -s on /dev/rdsk/c3t1d0p0 | ||
| - | # ./smartctl -a /dev/rdsk/c3t1d0p0 | ||
| - | smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.11] (local build) | ||
| - | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | ||
| - | |||
| - | === START OF INFORMATION SECTION === | ||
| - | Model Family: Hitachi Travelstar 7K500 | ||
| - | Device Model: Hitachi HTS725050A9A364 | ||
| - | Serial Number: 101207PCK404GLG45G5J | ||
| - | Firmware Version: PC4OC70E | ||
| - | User Capacity: 500,107,862,016 bytes | ||
| - | Device is: In smartctl database [for details use: -P show] | ||
| - | ATA Version is: 8 | ||
| - | ATA Standard is: ATA-8-ACS revision 6 | ||
| - | Local Time is: Sun Feb 6 15:15:43 2011 JST | ||
| - | SMART support is: Available - device has SMART capability. | ||
| - | SMART support is: Enabled | ||
| - | |||
| - | |||
| - | Error SMART Thresholds Read failed: I/O error | ||
| - | Smartctl: SMART Read Thresholds failed. | ||
| - | |||
| - | === START OF READ SMART DATA SECTION === | ||
| - | SMART overall-health self-assessment test result: PASSED | ||
| - | |||
| - | General SMART Values: | ||
| - | Offline data collection status: (0x00) Offline data collection activity | ||
| - | was never started. | ||
| - | Auto Offline Data Collection: Disabled. | ||
| - | Self-test execution status: ( 0) The previous self-test routine completed | ||
| - | without error or no self-test has ever | ||
| - | been run. | ||
| - | Total time to complete Offline | ||
| - | data collection: ( 645) seconds. | ||
| - | Offline data collection | ||
| - | capabilities: (0x5b) SMART execute Offline immediate. | ||
| - | Auto Offline data collection on/off support. | ||
| - | Suspend Offline collection upon new | ||
| - | command. | ||
| - | Offline surface scan supported. | ||
| - | Self-test supported. | ||
| - | No Conveyance Self-test supported. | ||
| - | Selective Self-test supported. | ||
| - | SMART capabilities: (0x0003) Saves SMART data before entering | ||
| - | power-saving mode. | ||
| - | Supports SMART auto save timer. | ||
| - | Error logging capability: (0x01) Error logging supported. | ||
| - | General Purpose Logging supported. | ||
| - | Short self-test routine | ||
| - | recommended polling time: ( 2) minutes. | ||
| - | Extended self-test routine | ||
| - | recommended polling time: ( 131) minutes. | ||
| - | SCT capabilities: (0x003d) SCT Status supported. | ||
| - | SCT Error Recovery Control supported. | ||
| - | SCT Feature Control supported. | ||
| - | SCT Data Table supported. | ||
| - | |||
| - | SMART Attributes Data Structure revision number: 16 | ||
| - | Vendor Specific SMART Attributes with Thresholds: | ||
| - | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | ||
| - | 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 | ||
| - | 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 | ||
| - | 3 Spin_Up_Time 0x0007 100 100 033 Pre-fail Always - 2 | ||
| - | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3 | ||
| - | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | ||
| - | 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | ||
| - | 8 Seek_Time_Performance 0x0005 100 100 --- Pre-fail Offline - 0 | ||
| - | 9 Power_On_Hours 0x0012 100 100 --- Old_age Always - 0 | ||
| - | 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 | ||
| - | 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 3 | ||
| - | 191 G-Sense_Error_Rate 0x000a 100 100 --- Old_age Always - 0 | ||
| - | 192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 1 | ||
| - | 193 Load_Cycle_Count 0x0012 100 100 --- Old_age Always - 16 | ||
| - | 194 Temperature_Celsius 0x0002 229 229 --- Old_age Always - 24 (Min/Max 22/27) | ||
| - | 196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 | ||
| - | 197 Current_Pending_Sector 0x0022 100 100 --- Old_age Always - 0 | ||
| - | 198 Offline_Uncorrectable 0x0008 100 100 --- Old_age Offline - 0 | ||
| - | 199 UDMA_CRC_Error_Count 0x000a 200 200 --- Old_age Always - 0 | ||
| - | 223 Load_Retry_Count 0x000a 100 100 --- Old_age Always - 0 | ||
| - | |||
| - | SMART Error Log Version: 1 | ||
| - | No Errors Logged | ||
| - | |||
| - | SMART Self-test log structure revision number 1 | ||
| - | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
| - | |||
| - | |||
| - | SMART Selective self-test log data structure revision number 1 | ||
| - | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
| - | 1 0 0 Not_testing | ||
| - | 2 0 0 Not_testing | ||
| - | 3 0 0 Not_testing | ||
| - | 4 0 0 Not_testing | ||
| - | 5 0 0 Not_testing | ||
| - | Selective self-test flags (0x0): | ||
| - | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| - | If Selective self-test is pending on power-up, resume after 0 minute delay.</code> | ||
| - | |||
| - | * SATAのAHCIポートを使う場合は、 | ||
| - | * <code># ./smartctl -T permissive -d sat,12 -s on /dev/rdsk/c4t0d0p0 | ||
| - | # ./smartctl -T permissive -d sat,12 -a /dev/rdsk/c4t0d0p0 | ||
| - | smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.11] (local build) | ||
| - | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | ||
| - | |||
| - | === START OF INFORMATION SECTION === | ||
| - | Model Family: Hitachi Travelstar 5K500.B | ||
| - | Device Model: Hitachi HTS545050B9A300 | ||
| - | Serial Number: 101126PBN403M7CPXP3E | ||
| - | LU WWN Device Id: 5 000cca 67cc9f775 | ||
| - | Firmware Version: PB4OC64G | ||
| - | User Capacity: 500,107,862,016 bytes [500 GB] | ||
| - | Sector Size: 512 bytes logical/physical | ||
| - | Device is: In smartctl database [for details use: -P show] | ||
| - | ATA Version is: 8 | ||
| - | ATA Standard is: ATA-8-ACS revision 6 | ||
| - | Local Time is: Sun Nov 27 10:27:24 2011 JST | ||
| - | SMART support is: Available - device has SMART capability. | ||
| - | SMART support is: Enabled | ||
| - | |||
| - | === START OF READ SMART DATA SECTION === | ||
| - | SMART overall-health self-assessment test result: PASSED | ||
| - | |||
| - | General SMART Values: | ||
| - | Offline data collection status: (0x00) Offline data collection activity | ||
| - | was never started. | ||
| - | Auto Offline Data Collection: Disabled. | ||
| - | Self-test execution status: ( 0) The previous self-test routine completed | ||
| - | without error or no self-test has ever | ||
| - | been run. | ||
| - | Total time to complete Offline | ||
| - | data collection: ( 645) seconds. | ||
| - | Offline data collection | ||
| - | capabilities: (0x5b) SMART execute Offline immediate. | ||
| - | Auto Offline data collection on/off support. | ||
| - | Suspend Offline collection upon new | ||
| - | command. | ||
| - | Offline surface scan supported. | ||
| - | Self-test supported. | ||
| - | No Conveyance Self-test supported. | ||
| - | Selective Self-test supported. | ||
| - | SMART capabilities: (0x0003) Saves SMART data before entering | ||
| - | power-saving mode. | ||
| - | Supports SMART auto save timer. | ||
| - | Error logging capability: (0x01) Error logging supported. | ||
| - | General Purpose Logging supported. | ||
| - | Short self-test routine | ||
| - | recommended polling time: ( 2) minutes. | ||
| - | Extended self-test routine | ||
| - | recommended polling time: ( 158) minutes. | ||
| - | SCT capabilities: (0x003d) SCT Status supported. | ||
| - | SCT Error Recovery Control supported. | ||
| - | SCT Feature Control supported. | ||
| - | SCT Data Table supported. | ||
| - | |||
| - | SMART Attributes Data Structure revision number: 16 | ||
| - | Vendor Specific SMART Attributes with Thresholds: | ||
| - | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | ||
| - | 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 | ||
| - | 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 | ||
| - | 3 Spin_Up_Time 0x0007 152 152 033 Pre-fail Always - 2 | ||
| - | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 77 | ||
| - | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | ||
| - | 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | ||
| - | 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 | ||
| - | 9 Power_On_Hours 0x0012 090 090 000 Old_age Always - 4697 | ||
| - | 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | ||
| - | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 | ||
| - | 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 | ||
| - | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16 | ||
| - | 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 14476 | ||
| - | 194 Temperature_Celsius 0x0002 229 229 000 Old_age Always - 24 (Min/Max 18/36) | ||
| - | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | ||
| - | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | ||
| - | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | ||
| - | 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | ||
| - | 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 | ||
| - | |||
| - | SMART Error Log Version: 1 | ||
| - | No Errors Logged | ||
| - | |||
| - | SMART Self-test log structure revision number 1 | ||
| - | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
| - | |||
| - | |||
| - | SMART Selective self-test log data structure revision number 1 | ||
| - | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
| - | 1 0 0 Not_testing | ||
| - | 2 0 0 Not_testing | ||
| - | 3 0 0 Not_testing | ||
| - | 4 0 0 Not_testing | ||
| - | 5 0 0 Not_testing | ||
| - | Selective self-test flags (0x0): | ||
| - | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| - | If Selective self-test is pending on power-up, resume after 0 minute delay.</code> | ||
| - | |||
| - | |||
