差分
この文書の現在のバージョンと選択したバージョンの差分を表示します。
両方とも前のリビジョン 前のリビジョン 次のリビジョン | 前のリビジョン | ||
os:oi:smartctl:start [2011/10/22 19:05] yuki |
— (現在) | ||
---|---|---|---|
ライン 1: | ライン 1: | ||
- | ======= smartctl ====== | ||
- | |||
- | * 前提 | ||
- | * Solaris系のS.M.A.R.TはATAコマンド叩けない。 | ||
- | * AHCIならできる。IDE互換だと無理。諦めましょう。 | ||
- | |||
- | * smartctlのコンパイル | ||
- | * <code># pfexec pkg install gcc-dev | ||
- | # wget http://sourceforge.net/projects/smartmontools/files/smartmontools/5.40/smartmontools-5.40.tar.gz/download | ||
- | # tar zxvf smartmontools-5.40.tar.gz | ||
- | # cd smartmontools-5.40 | ||
- | # ./configure | ||
- | # make | ||
- | # pfexec make install</code> | ||
- | |||
- | * 検索したら引っかかった人。 | ||
- | * http://cafenate.wordpress.com/2009/02/22/setting-up-smartmontools-on-opensolaris/ | ||
- | |||
- | |||
- | * SASカードであるところの[[:device:sata:br10i:|BR10i]]にぶら下がっているHDDに向けて使ってみる。 | ||
- | * -T permissive つけた方が表示速度的に良いかも。 | ||
- | * <code># ./smartctl -T permissive -s on /dev/rdsk/c3t1d0p0 | ||
- | # ./smartctl -a /dev/rdsk/c3t1d0p0 | ||
- | smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.11] (local build) | ||
- | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | ||
- | |||
- | === START OF INFORMATION SECTION === | ||
- | Model Family: Hitachi Travelstar 7K500 | ||
- | Device Model: Hitachi HTS725050A9A364 | ||
- | Serial Number: 101207PCK404GLG45G5J | ||
- | Firmware Version: PC4OC70E | ||
- | User Capacity: 500,107,862,016 bytes | ||
- | Device is: In smartctl database [for details use: -P show] | ||
- | ATA Version is: 8 | ||
- | ATA Standard is: ATA-8-ACS revision 6 | ||
- | Local Time is: Sun Feb 6 15:15:43 2011 JST | ||
- | SMART support is: Available - device has SMART capability. | ||
- | SMART support is: Enabled | ||
- | |||
- | |||
- | Error SMART Thresholds Read failed: I/O error | ||
- | Smartctl: SMART Read Thresholds failed. | ||
- | |||
- | === START OF READ SMART DATA SECTION === | ||
- | SMART overall-health self-assessment test result: PASSED | ||
- | |||
- | General SMART Values: | ||
- | Offline data collection status: (0x00) Offline data collection activity | ||
- | was never started. | ||
- | Auto Offline Data Collection: Disabled. | ||
- | Self-test execution status: ( 0) The previous self-test routine completed | ||
- | without error or no self-test has ever | ||
- | been run. | ||
- | Total time to complete Offline | ||
- | data collection: ( 645) seconds. | ||
- | Offline data collection | ||
- | capabilities: (0x5b) SMART execute Offline immediate. | ||
- | Auto Offline data collection on/off support. | ||
- | Suspend Offline collection upon new | ||
- | command. | ||
- | Offline surface scan supported. | ||
- | Self-test supported. | ||
- | No Conveyance Self-test supported. | ||
- | Selective Self-test supported. | ||
- | SMART capabilities: (0x0003) Saves SMART data before entering | ||
- | power-saving mode. | ||
- | Supports SMART auto save timer. | ||
- | Error logging capability: (0x01) Error logging supported. | ||
- | General Purpose Logging supported. | ||
- | Short self-test routine | ||
- | recommended polling time: ( 2) minutes. | ||
- | Extended self-test routine | ||
- | recommended polling time: ( 131) minutes. | ||
- | SCT capabilities: (0x003d) SCT Status supported. | ||
- | SCT Error Recovery Control supported. | ||
- | SCT Feature Control supported. | ||
- | SCT Data Table supported. | ||
- | |||
- | SMART Attributes Data Structure revision number: 16 | ||
- | Vendor Specific SMART Attributes with Thresholds: | ||
- | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | ||
- | 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 | ||
- | 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 | ||
- | 3 Spin_Up_Time 0x0007 100 100 033 Pre-fail Always - 2 | ||
- | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3 | ||
- | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | ||
- | 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | ||
- | 8 Seek_Time_Performance 0x0005 100 100 --- Pre-fail Offline - 0 | ||
- | 9 Power_On_Hours 0x0012 100 100 --- Old_age Always - 0 | ||
- | 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 | ||
- | 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 3 | ||
- | 191 G-Sense_Error_Rate 0x000a 100 100 --- Old_age Always - 0 | ||
- | 192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 1 | ||
- | 193 Load_Cycle_Count 0x0012 100 100 --- Old_age Always - 16 | ||
- | 194 Temperature_Celsius 0x0002 229 229 --- Old_age Always - 24 (Min/Max 22/27) | ||
- | 196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 | ||
- | 197 Current_Pending_Sector 0x0022 100 100 --- Old_age Always - 0 | ||
- | 198 Offline_Uncorrectable 0x0008 100 100 --- Old_age Offline - 0 | ||
- | 199 UDMA_CRC_Error_Count 0x000a 200 200 --- Old_age Always - 0 | ||
- | 223 Load_Retry_Count 0x000a 100 100 --- Old_age Always - 0 | ||
- | |||
- | SMART Error Log Version: 1 | ||
- | No Errors Logged | ||
- | |||
- | SMART Self-test log structure revision number 1 | ||
- | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
- | |||
- | |||
- | SMART Selective self-test log data structure revision number 1 | ||
- | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
- | 1 0 0 Not_testing | ||
- | 2 0 0 Not_testing | ||
- | 3 0 0 Not_testing | ||
- | 4 0 0 Not_testing | ||
- | 5 0 0 Not_testing | ||
- | Selective self-test flags (0x0): | ||
- | After scanning selected spans, do NOT read-scan remainder of disk. | ||
- | If Selective self-test is pending on power-up, resume after 0 minute delay.</code> | ||
- | |||