内容へ移動
[[
✎ os:oi:smartctl:start
]]
doku@ainoniwa
文書の表示
最近の変更
サイトマップ
ログイン
この文書は読取専用です。文書のソースを閲覧することは可能ですが、変更はできません。もし変更したい場合は管理者に連絡してください。
======= smartctl ====== * 前提 * Solaris系のS.M.A.R.TはATAコマンド叩けない。 * AHCIならできる。IDE互換だと無理。諦めましょう。 * smartctlのコンパイル * <code># pfexec pkg install gcc-dev # wget http://sourceforge.net/projects/smartmontools/files/smartmontools/5.40/smartmontools-5.40.tar.gz/download # tar zxvf smartmontools-5.40.tar.gz # cd smartmontools-5.40 # ./configure # make # pfexec make install</code> * 検索したら引っかかった人。 * http://cafenate.wordpress.com/2009/02/22/setting-up-smartmontools-on-opensolaris/ * SASカードであるところの[[:device:sata:br10i:|BR10i]]にぶら下がっているHDDに向けて使ってみる。 * <code>./smartctl -T permissive -s on /dev/rdsk/c3t1d0 ↓-T permissive つけた方が表示速度的に良いかも。 ./smartctl -a /dev/rdsk/c3t1d0 smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.11] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 7K500 Device Model: Hitachi HTS725050A9A364 Serial Number: 101207PCK404GLG45G5J Firmware Version: PC4OC70E User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Sun Feb 6 15:15:43 2011 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled Error SMART Thresholds Read failed: I/O error Smartctl: SMART Read Thresholds failed. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 --- Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 --- Old_age Always - 0 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 3 191 G-Sense_Error_Rate 0x000a 100 100 --- Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 1 193 Load_Cycle_Count 0x0012 100 100 --- Old_age Always - 16 194 Temperature_Celsius 0x0002 229 229 --- Old_age Always - 24 (Min/Max 22/27) 196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 --- Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 --- Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 --- Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.</code>
文書の表示
以前のリビジョン
メディアマネージャー
文書の先頭へ