**以前のリビジョンの文書です**
ドライバの追加インストール
後から拡張カードを追加して、ドライバをインストールする場合の手法。
バージョンの違いによって、多少ブレがあります。
目的
X4447A-Z(SunのQuad Gigabit Ethernetカード)を追加して、ESXiに認識させる。
手順
VMware-vSphere-CLI(コマンドラインツール)の入手とインストール
ESXiのバージョンにあったものを入手すること。 X4447A-Z用のnxgeドライバの入手
vmware-esx-drivers-net-nxgeのISOをマウントして、nxge-vmware-driver-1-0-2-3-offlinebundle-249974.zipをコピー。 * 一般に、ドライバCDの中のofflinebundleと書かれたzipを使用してインストールを行うとか。 コピーしたファイルをC:\Program Files (x86)\VMware\VMware vSphere CLI\binに置く。
適当にリネームしてもいい。 コマンドプロンプトで、以下のコマンドを叩いてインストール。<code> C:>cd C:\Program Files (x86)\VMware\VMware vSphere CLI\bin C:\Program Files (x86)\VMware\VMware vSphere CLI\bin>.\vihostupdate.pl –server 192.168.1.22 –install –bundle nxge-vmware-driver-1-0-2-3-offline_bundle-249974.zip Enter username: root Enter password: The update completed successfully, but the system needs to be rebooted for the changes to be effective. </code>
※ESXi 4.0用に作られたzipをESXi 4.1に適応しようとした場合、以下のようにエラーが出ます。 <code> C:\Program Files (x86)\VMware\VMware vSphere CLI\bin>.\vihostupdate.pl –server 192.168.122.21 –install –bundle nxge-v mware-driver-1-0-2-3-offline_bundle-249974.zip Enter username: root Enter password: Please wait patch installation is in progress … No matching bulletin or VIB was found in the metadata.No bulletins for this platform could be found. Nothing to do. </code> この場合、vmware.xmlを書き換えて回避する。
今回(X4447A-Z)の場合は、下記2行のversionを“4.0.0”から“4.1.0”に書き換えたらOKでした。
<swPlatform locale=“” productLineID=“esx” version=“4.1.0” /> <swPlatform locale=“” productLineID=“embeddedEsx” version=“4.1.0” />
こんな感じ

