差分
この文書の現在のバージョンと選択したバージョンの差分を表示します。
|
os:freebsd:smartctl:start [2010/09/08 01:04] yuki |
os:freebsd:smartctl:start [2011/08/24 10:07] |
||
|---|---|---|---|
| ライン 1: | ライン 1: | ||
| - | ====== smartmontools ====== | ||
| - | S.M.A.R.T情報を取得するときに使うツール。 | ||
| - | <code> | ||
| - | # cd /usr/ports/sysutils/smartmontools | ||
| - | # make install clean | ||
| - | # rehash | ||
| - | </code> | ||
| - | |||
| - | * とりあえず情報全部出すときは -a 付けてデバイスを指定する。 | ||
| - | |||
| - | <code> | ||
| - | # smartctl -a /dev/ad6 | ||
| - | smartctl 5.39.1 2010-01-28 r3054 [FreeBSD 8.0-RELEASE-p4 amd64] (local build) | ||
| - | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | ||
| - | |||
| - | === START OF INFORMATION SECTION === | ||
| - | Model Family: Hitachi Deskstar 7K2000 | ||
| - | Device Model: Hitachi HDS722020ALA330 | ||
| - | Serial Number: JK1170YAH3NR3P | ||
| - | Firmware Version: JKAOA28A | ||
| - | User Capacity: 2,000,398,934,016 bytes | ||
| - | Device is: In smartctl database [for details use: -P show] | ||
| - | ATA Version is: 8 | ||
| - | ATA Standard is: ATA-8-ACS revision 4 | ||
| - | Local Time is: Wed Sep 8 01:02:56 2010 JST | ||
| - | SMART support is: Available - device has SMART capability. | ||
| - | SMART support is: Enabled | ||
| - | |||
| - | === START OF READ SMART DATA SECTION === | ||
| - | SMART overall-health self-assessment test result: PASSED | ||
| - | |||
| - | General SMART Values: | ||
| - | Offline data collection status: (0x84) Offline data collection activity | ||
| - | was suspended by an interrupting command from host. | ||
| - | Auto Offline Data Collection: Enabled. | ||
| - | Self-test execution status: ( 0) The previous self-test routine completed | ||
| - | without error or no self-test has ever | ||
| - | been run. | ||
| - | Total time to complete Offline | ||
| - | data collection: (23065) seconds. | ||
| - | Offline data collection | ||
| - | capabilities: (0x5b) SMART execute Offline immediate. | ||
| - | Auto Offline data collection on/off support. | ||
| - | Suspend Offline collection upon new | ||
| - | command. | ||
| - | Offline surface scan supported. | ||
| - | Self-test supported. | ||
| - | No Conveyance Self-test supported. | ||
| - | Selective Self-test supported. | ||
| - | SMART capabilities: (0x0003) Saves SMART data before entering | ||
| - | power-saving mode. | ||
| - | Supports SMART auto save timer. | ||
| - | Error logging capability: (0x01) Error logging supported. | ||
| - | General Purpose Logging supported. | ||
| - | Short self-test routine | ||
| - | recommended polling time: ( 1) minutes. | ||
| - | Extended self-test routine | ||
| - | recommended polling time: ( 255) minutes. | ||
| - | SCT capabilities: (0x003d) SCT Status supported. | ||
| - | SCT Feature Control supported. | ||
| - | SCT Data Table supported. | ||
| - | |||
| - | SMART Attributes Data Structure revision number: 16 | ||
| - | Vendor Specific SMART Attributes with Thresholds: | ||
| - | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | ||
| - | 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 | ||
| - | 2 Throughput_Performance 0x0005 131 131 054 Pre-fail Offline - 108 | ||
| - | 3 Spin_Up_Time 0x0007 117 117 024 Pre-fail Always - 615 (Average 617) | ||
| - | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 51 | ||
| - | 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 | ||
| - | 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 | ||
| - | 8 Seek_Time_Performance 0x0005 112 112 020 Pre-fail Offline - 39 | ||
| - | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4593 | ||
| - | 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 | ||
| - | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51 | ||
| - | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 93 | ||
| - | 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 93 | ||
| - | 194 Temperature_Celsius 0x0002 142 142 000 Old_age Always - 42 (Lifetime Min/Max 19/50) | ||
| - | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | ||
| - | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 | ||
| - | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 | ||
| - | 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 | ||
| - | |||
| - | SMART Error Log Version: 0 | ||
| - | No Errors Logged | ||
| - | |||
| - | SMART Self-test log structure revision number 1 | ||
| - | No self-tests have been logged. [To run self-tests, use: smartctl -t] | ||
| - | |||
| - | |||
| - | SMART Selective self-test log data structure revision number 1 | ||
| - | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | ||
| - | 1 0 0 Not_testing | ||
| - | 2 0 0 Not_testing | ||
| - | 3 0 0 Not_testing | ||
| - | 4 0 0 Not_testing | ||
| - | 5 0 0 Not_testing | ||
| - | Selective self-test flags (0x0): | ||
| - | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| - | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
| - | </code> | ||
| - | |||
| - | * | ||
